Windsor Garage Door Seal
Click the link below for an overview of garage door weather seal.
Windsor Garage Door Weather Stripping
Windsor P – Bulb Style Garage Door Weather Seal
Fold the ends together and slide into the retainer on the bottom of the door.
4″ Wide over all laid flat.
Nice heavy seal for Windsor Brand Garage Doors.
For Windsor brand garage doors with single channel retainers.
We add a minimum of 2″ to the listed lenght for a perfect fit.
Very easy to install. Remove old weather seal, clean and straighten the bottom
retainer on the door. Use a spray lubricant on the channel on the bottom of the door.
One person guides the seal into the channel, on person pulls the seal along the door.
Do not stretch the seal, the seal is to be in a relaxed state when installed, not stretched.
Cut to lenght using a utility knife and lightly crimp the ends of the channel to
hold the weather seal in place.
If you have an uneven floor or any other issues in getting the
garage door to seal the floor we have many options.
There are different style retainers for the bottom of the door that will accept
a wide selection of weather seal, you are not locked into using this seal
on your garage door if you have any issues in sealing the door to the floor.
Replacing the retainer will allow you to use a wide range of types and styles
of weather seal, see our store under weather seal.
Call or email for quote on bulk sales.
Windsor garage door seal.